Compact diverging rail junction 10x10 (4 5x5 blueprints) (part 2/2)

This is part 2 of 2 of the bluerprint set. https://satisfactoryblueprints.com/set/425baf83-12ee-431c-b9b8-f3c98c96941c is the url to the full set. It's a 4 direction rail junction with dedicated rails for every direction. This also allows it to use only block signals for further efficiency. The trains have 8 to 11m of height between the rails which cross, so they won't clip and derail. In general I tried to minimize clipping, and even rails at Y junctions merge cleanly, but unfortunately placing signals ruins that as some of them have to clip if you want to place them optimally. This build comes in two 5x5 blueprints, part 1 and part 2. Part 1 faces itself touching nose to nose, as does part 2 with itself. There are some alignment poles to help you connect these as they don't align down the center. Turn on auto connect. A warning, due to making this with autoconnect and 5x5 blueprints to make a larger 10x10 junction, you'll need to manually correct the signalling as this is prone to the signal loops into itself bug. Simply delete and rebuild signals with warnings. If that doesn't work, delete the outer rail that splits off at a Y junction and the signal, then rebuild both the rail and the junction.