Ultimate Hypertube Cannon Barrel (2 : 3)

Part 2 of 3 To place the barrel, use blueprint mode and hover on top of the base. Lock the blueprint and nudge the barrel towards the front of the base and down, as seen in the SS below. Once in this position, you can adjust the pitch of your barrel. Make sure to remember the angle you set the barrel to, as you will need to use that same angle for the muzzle. You also need to power your launchers; for this, you can use the power outlet on the "cannon base". Connect the power to either end of the barrel; the far end is usually easiest. PART OF A SET